Reading The Plc Indicator Light - Devolo Magic 1 WiFi 2-1 Manual

2.3.1Reading the PLC indicator light

The integrated PLC indicator light (LED) shows the
status for the devolo Magic 1 WiFi by illuminating
and/or flashing:
LED Flashing
haviour
1 Red LED Lights up for
up to 2 sec.
2 Red LED Flashes at in-
tervals of 0.5
sec. (on/off)
be- Meaning
Start-up process
Status 1:
The reset of the devolo Magic adapter was
successful. The PLC/reset button has been
pressed and held for 10 seconds.
Status 2:
The devolo Magic adapter (once again) has
the factory default settings. Since the last
reset, no pairing with another devolo Magic
adapter has taken place.
Connect the adapter
devolo Magic adapter to create a full-
fledged PLC network as described in
Chapter 2.3 Pairing – Establishing a PLC
connection.
Introduction 16
LED status display
(web interface*)
Cannot be disabled
Cannot be disabled
with another
devolo Magic 1 WiFi
2-1