Reading The Wi-Fi Indicator Light - Devolo Magic 1 WiFi 2-1 Manual

b
In order to switch WiFi back on, briefly tap
the WiFi button.
Connecting WiFi devices via WPS
b
If the device is still on factory defaults, tap the
WiFi button in order to activate WPS.
b
If the WiFi connection was switched off and
you would like to activate WPS, press the
WiFi button twice; once to switch WiFi on,
and again to activate WPS.
b
If the WiFi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
Wi-Fi-LED Flashing behavior
1 White LED Flashes at intervals
of
5 sec. off
2 White LED Lights up steady
Meaning
The devolo Magic adapter is in
0,1 sec. on / WPS mode to integrate Wi-Fi-
enabled devices via WPS.
Wi-Fi is switched on and active.
WPS is one of the encryption standards de-
veloped by the WiFi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).

2.3.3 Reading the Wi-Fi indicator light

The integrated Wi-Fi indicator light (LED) shows
the status of the devolo Magic 1 WiFi by illumina-
ting and/or flashing
Introduction 20
LED status display
(web interface*)
Cannot be disabled
Can be disabled
2-1
devolo Magic 1 WiFi