Establish A Wi-Fi Connection With The Devolo Magic 1 Wifi - Devolo Magic 1 WiFi 2-1 Manual

The new devolo Magic adapter pairs auto-
matically so no button needs to be pressed.
The LED of this adapter now also flashes
white.
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
For each pairing operation, only one addi-
tional adapter can be added at a time.
3.4.3Changing the network password
A network password can also be changed in the
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.5 Powerline)
or
b
Using devolo Cockpit
devolo Home Networking App.
information, refer to the chapter 3.5 Installa-
tion of devolo software.
3.4.4 Establish a Wi-Fi connection with
the devolo Magic 1 WiFi
Establish the WiFi connection with your laptop,
tablet or smartphone by entering the previously
noted WiFi key as the network security key.
Integrating the Wi-Fi adapter into an existing
Wi-Fi network
To ensure that the devolo Magic 1 WiFi has the
same Wi-Fi configuration as your Wi-Fi router, you
can apply the Wi-Fi access data at the touch of a
button using the WiFi Clone function. This can be
enabled in different ways:
or the
For more
Initial use 26
2-1
devolo Magic 1 WiFi