Powerline; Powerline Network - Devolo Magic 1 WiFi 2-1 Manual

4.5 Powerline

Make all changes to your PLC network in the Po-
werline area.

4.5.1Powerline network

In order to use a new devolo Magic 1 WiFi in your
devolo Magic network, first you have to connect it
to your existing devolo Magic adapters devices as a
network. This is accomplished by using a shared
password. This can be assigned in different ways:
Network configuration 42
b
Using devolo Cockpit
devolo Home Network App (see Chapter 3.5
Installation of devolo software),
b
Only using the PLC button (see Chapter 2.3
Pairing – Establishing a PLC connection and
3.4 Connecting the devolo Magic 1 WiFi)
b
Using the web interface, in the PLC menu; as
described below:
Pairing – Using on-screen button
1
Click Start pairing to start the pairing opera-
tion. This may take some time.
2
As soon as the new devolo Magic adapter is
integrated into your existing network, it
appears in a list of available and established
connections.
Unpairing – Removing an adapter from a net-
work
1
To remove a devolo Magic adapter from your
devolo Magic network, click Leave Powerline
network.
2
Wait until the LED flashes red and then dis-
connect the devolo Magic adapter from the
mains supply.
or the
2-1
devolo Magic 1 WiFi