Lan; Status; Ipv4/Ipv6 Configuration - Devolo Magic 1 WiFi 2-1 Manual

activating the automatic setting, please disable it
and set the compatibility mode as well as the signal
transmission profile manually:
b
SISO
a
Full power
a
VDSL 17a (default)
a
VDSL 35b
Get in touch with your internet provider to
find out which signal transmission profile is
the best option for your internet connection.
The SISO operating mode and the VDSL 17a signal
transmission profile are configured by default.
Network configuration 44

4.6 LAN

You make changes to the network settings in the
LAN area.

4.6.1 Status

You can see the current LAN status of the
devolo Magic adapters here. The Ethernet area
shows the network devices connected to the two
network connectors Port 1 and Port 2 (e.g. PC,
NAS, etc.).
IPv4/IPv6
Depending on how the devolo Magic 1 WiFi is
connected to the Internet (IPv4 or IPv6), current
2-1
devolo Magic 1 WiFi