Description Of Terminals - Urmet VOG5 1760/6 Manual De Instalación

1
2

3.1. DESCRIPTION OF TERMINALS

}
S-
Supplementary ringer
S+
]
CP Floor call
]
LINE IN Power supply Bus input
]
LINE OUT Power supply Bus output
4. INSTALLATION CONSTRAINTS OF THE VIDEO DOOR PHONE
If on the video door phone VOG5 Ref. 1760/6 the Gesture function is activated you can have a reduction
in the number of video door phone in a riser column derived from a column distributor Ref. 1083/53 or a
column interface Ref. 1083/50, with the same maximum distances.
The reduction is as follows:
Power supply
1083/20A
1083/23
For other types of cables, see the booklet "Limit number of VOG5 video door phones in riser DS1083-156"
on the Urmet website by scanning the following QR Code.
8
Cable type
2Voice Ref. 1083/92 - /94
CAT5 UTP (one twisted pair)
2Voice Ref. 1083/92 - /94
CAT5 UTP (one twisted pair)
1
To connect the video door phone in
in-out, it is necessary to remove the door,
as indicated in the figure, and insert the
adaptor circuit Ref. 1750/50, following the
instructions found in the booklet provided
with the product.
Number of video door phones
2
64
32
24
16
DS1760-001