Appendix B: Wall Mounting; Hardware Specifications - Bose MUSIC AMPLIFIER Manual De Instrucciones

HARDWARE SPECIFICATIONS

You can mount the amplifier on a wall with the mounting bracket and hardware
(not provided). When choosing the hardware, make sure you use hardware that is
appropriate for the intended mounting surface.
ITEM
Wall thickness
Drill bit
Phillips-head
wood screws
(4, not included)
Anchors
(4, not included)
WARNING: Do NOT mount on surfaces that are not sturdy enough, or that have
hazards concealed behind them, such as electrical wiring or plumbing. If
you're not sure about installing the bracket, contact a qualified
professional installer. Make sure the bracket is installed according to local
building codes.
A P P EN D IX B: WA L L M O UN TIN G
WOOD
⁄ " (12.8 mm)
1 1
2 2
or thicker
⁄ " (2.4 mm)
3 3
3 2 32
#10 x 1 ⁄ "
1 1
4 4
(M5 x 32 mm)
Not used
WALLBOARD
⁄ " (9.5 mm)
3 3
8 8
or thicker
⁄ " (6.4 mm)
1 1
4 4
Not used
#10 (M5)
wallboard anchors
NOTE: Requires a
minimum of a
10 lb (4536g) rating.
|
5 6 E N G
MASONRY
4" (101.6 mm)
or thicker
⁄ " (6.4 mm)
1 1
4 4
Not used
#10 (M6)
masonry anchors
NOTE: Requires a
minimum of a
10 lb (4536g) rating.