Master Trimmers MT Dry 200 Manual De Uso Y Mantenimiento página 22

10. Setting-Ups
10.1. Assembling the MT Dry 200
The MT Dry 200 is delivered completely protected and boxed. First of all, open the box and check that all the ma-
terial received is the one specified in this manual and is in optimum conditions. It is recommended to place the
machine and all the supplied components on a flat surface with enough space for assembly.
Place the plastic tray on the bottom of the equipment , as shown in the following image, and then turn the lock
B A
to the position shown to prevent it from sliding.
Place the lid , as shown in the picture, on the end of the barrel so that the product remains inside it when the
C
machine is running.
22
www.masterproducts.es