Making Hot Water - UFESA Palermo Manual De Instrucciones

Note: If when the power is turned on the steam preheating indicator keeps flashing fast,
it means that the steam knob is not closed. Turn the steam knob to the closed position.
1. Prepare espresso first with a large enough cup according to part "MAKE ESPRESSO COFFEE"
2. Use whole, fresh cold milk out of the fridge (8ºC-10ºC), and pour 1/3 milk in cup.
3. Touch steam switch , it starts preheating, Single-cup and Double -cup coffee indicator
go out, steam indicator is flashing, then wait for steam indicator lights on, now preheating
finished.
4. Put a stainless steel cup under steam nozzle. Let the steam pipe nozzle float below the
surface of the milk.
5. Open steam knob, rotate it to the maximum position to frothing milk.
6. When desired milk foam reached, then turn off knob, steam is stopped, remove cup and
pour the frothed milk into prepared espresso, now cappuccino is ready.

Making hot water

1. Put a container under hot water outlet.
2. When all indicator lamp stop blinking, open steam knob, rotate it to the maximum posi-
tion, hot water will be come out from hot water pipe immediately; In the process of making
hot water, the indicator / flashes.
3. When the hot water reaches the required amount, turn the "steam knob" clockwise to
the off position, and the hot water stops flowing out.
Heating liquid (steam function)
1. Use a stainless steel cup, pour cold liquid to 1/2 cup.
2. Touch steam button , it starts preheating, the single and double cup coffee indicator
lights go out, then steam indicator lamp is flashing, preheating will be finished after steam
indicator lamp light on.
3. Put a cup under steam nozzle, let steam nozzle insert into the liquid.
4. Turn on steam knob, release steam.
5. Turn off the steam knob when desired temperature is reached, now steam is stopped.
DECALCIFICATION
1. The machine builds up lime scale deposits over time, and you need descale the machine
every 2-3 months.
2. Pour water and descale liquid in water tank up to MAX capacity (water and descale
ratio is 4:1) Please use "household descale", or you can use the citric acid replace descale
(water and citric acid ratio is 100:3).
3. Lock the filter holder (no coffee powder) into the group as explained in "Make espresso
coffe".
4. Touch coffee button, make about 150ml coffee(or Make 3 cups of coffee) . Then touch
Steam warm-up switch, it starts preheating , open steam knob after steam indicator is
with the light on. Release steam about 2min and turn off the knob. Wait 15 minutes for
the machine to cool down before proceeding to step 5.
5. Repeat the step 4 for 3 times.
19