Klein Tools 501-915 Manual De Instrucciones página 9

Changing VoP Value /
Adding New Cable Information
Always verify that the VoP of
the cable you are measuring is
stored in the Cable Length Meter.
If it is not, check the cable box
for the information or check the
manufacturer's website. If the VoP
can not be located, a value can be
found using a known length of the
cable in question (see Obtaining
VoP Values section).
1. Press the Power button
power-ON the meter.
2. Use the Up
11
Arrow buttons to highlight the
cable type to be measured and
press the "Select" button (three
dots) .
8
3. Press the the "Library" button (three dots)
Down Arrow buttons to highlight the row to be corrected. At the
12
end of the list, "Add New" allows you to add a new cable without
changing any of the existing default known cable values.
4. Press the "Edit" button (two dots)
5. Use the Up
11
press the "Edit" button (two dots)
6. Use the "Left Arrow" (one dot)
highlight the numbers to be changed, and use the Up
Arrow buttons to increase or decrease the numbers until they display
the value you have obtained.
7. Enter/edit the Name, Manufacturer, and Impedance values as needed.
8. Press the Save button
display on the screen.
9. Press the "Return" button (three dots)
Obtaining VoP Values
There are three ways to obtain VoP values for a cable:
1. VoP values for the most common cable types are included in the Cable
Length Meter. They can be estimated based on these values or using
the chart on page 11.
2. The VoP can usually be obtained by checking the cable specifications
or contacting the manufacturer.
3. The VoP can be found using a known length of the cable that will
be used during testing (see Determining an Unknown VoP Value
section).
OPERATING INSTRUCTIONS
to
5
and Down
12
and Down Arrow buttons to highlight the VoP and
12
to save changes. "Save successful" will
10
05/29/2020
Type:
Pair:
VOP:
Length:
Name:
Manufacturer:
and use the Up
8
.
7
.
7
and "Right Arrow" (three dots)
6
to return to testing.
8
07:30 55%
Cable Must Be
!
Connected
Coax
1
70%
5
_______
_______
Cancel
11
and Down
11
and
to
8
12
9