Emergency Information; Product Description; Technical Data - Abicor Binzel PP Plus 36D Manual Del Usuario

3 Product description

NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.

2.3 Emergency information

In case of emergency, immediately interrupt the following supplies:
• Electrical power supply
• Coolant supply
• Compressed air supply
• Gas supply
• Further measures can be found in the "Power source" operating instructions or in the
documentation of further peripheral devices.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorization.
• The device must only be used by qualified personnel (in Germany, see TRBS 1203).

3.1 Technical Data

Ambient temperature of welding
Transport and storage
Relative humidity
Tab. 1 General Data
Type of voltage
Polarity of the electrode
Wire types
Type of use
Voltage rating
Protection type of the machine-side connections
Shielding gas (DIN EN ISO 14175)
Control device in torch handle
Tab. 2 General torch data according to EN 60 974-7
EN - 4
PP Plus 36D/240D/401D
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC direct voltage
Usually positive
commercially available round wires
manual
113 V peak value
IP2X , IP3X (EN 60 529)
CO and mixed gas M21
2
1 A AC / 250 V AC
BAL.0140 • 2018-10-15