Fein CG13-150 Instrucciones De Uso página 11

Extension cable.
If the use of an extension
WARNING
cord is required, its length
and conductor cross-section must be ade-
quate for the application in order to prevent
a voltage drop in the extension cord, power
loss and overheating of the power tool. Oth-
erwise, the extension cable and power tool
are prone to electrical danger, and the
working efficiency is decreased.
Intended use of the power tool:
Hand-guided angle grinder for dry grinding,
wire brushing and cutting of metal and stone
in weather-protected environments without
the use of liquid coolants, using the applica-
tion tools and accessories recommended by
FEIN.
Recommended dimensions of extension
cables at an operating voltage of 120 V –
single-phase a. c., with only one power tool
CG13-150 connected:
Max. cable length, ft Max. cable length, m
≤ 100 200
100 –200 –300
Min. conductor size
A.W.G.
14 12
en
≤ 30 30
– 60
Min. conductor-
cross-section, mm
10 2.5 4.0
11
60
–100
2
6.0