Confirm Supplied Accessories; Put Batteries Into The Remote Control Unit (Pd-217 Only) - Pioneer PD-217 Manual De Instrucciones

1
3
OUTPUT
– LEVEL +
1 ¡
RANDOM
4 ¢
HI-LITE
7 8 3
1 2 3
4 5 6
7 8 9
10 >10 PROGRAM
Î
COMPACT DISC PLAYER
REMOTE CONTROL UNIT
PD-217
1 2
16
En
All manuals and user guides at all-guides.com
2
4
3

CONFIRM SUPPLIED ACCESSORIES

1
Output cable x 1
2
AA/R6P dry cell batteries x 2 (PD-217 only)
3
Remote control unit x 1 (PD-217 only)
4
Control cable x 1 (PD-117 only)
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT (PD-217 ONLY)
1. Open the rear cover.
2. Install AA/R6P batteries, correctly matching polarities.
3. Close the cover.
NOTES:
÷ In order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period (one
month or more). If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
÷ Do not allow books or other objects to rest on top of the re-
mote control unit, since the buttons may be depressed, causing
faster exhaustion of the batteries.
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment correctly
matching the positive ª and negative · polarities, as shown
by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand. Do not mix different brands of batteries.
D. When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction's rules that apply in your country/area.
<REMOTE CONTROL OPERATIONS>
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control receiver on the front panel
of the player. The remote control unit can be used within a range
of about 7 meters from the remote sensor, and within angles of up
to about 30 degrees.
Note for PD-217:
If the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light, control
may not be possible.
Note for PD-117:
Operate the PD-117 using the remote control unit which
accompanies the amplifier. (See page 12.)