Hi-Lite Scan - Pioneer PD-217 Manual De Instrucciones

4 1 ¡ ¢
HI-LITE
REPEAT
RANDOM
24
En
All manuals and user guides at all-guides.com
4 ¢
(PD-217)
HI–LITE
(PD-217)
RANDOM
(PD-217)
OUTPUT
– LEVEL +
(PD-217)
VARIOUS OPERATIONS
To display the playing time of each track
In the stop mode, pressing ¡ ¢ (or ¢) displays the playing
time of each track starting from track No.1.
÷ This function cannot be carried out with track No.30 or above.

Hi-Lite scan

When HI-LITE is pressed in the stop mode, playback starts from a
point 1 minute after the beginning of the track, and each track is
played for about 10 seconds. The 3 indicator blinks in the Hi-Lite
scan mode.
÷ Hi-Lite scan can be carried out from the desired elapsed time of
the track. During playback, press HI-LITE at the point you want
to start Hi-Lite scan playback. The player memorizes the minute
and second of the point and Hi-Lite scan playback is carried out
from the memorized minute and second on each track.
NOTES:
÷ When the playback time of a track is less than one minute or is
shorter than the memorized time, Hi-Lite Scan playback is carried
out from the beginning of the track for about 10 seconds.
When playback time of a track is less than 10 seconds, the track
is played from the beginning to the end.
÷ During program playback or random playback, pressing HI-LITE
cancels program playback or random playback. The player
memorizes the time of the point at which HI-LITE was pressed
and Hi-Lite Scan playback is carried out from the memorized
time on each track. However, the program contents will not be
erased.
÷ One track repeat cannot be performed in Hi-Lite scan playback
mode.
To repeat playback (repeat play)
To repeatedly play the displayed track, press REPEAT once. The
13REP indicator lights. The REPEAT button can be pressed in any
playback mode.
To repeatedly play all tracks on the disc in normal playback mode or
in the specified playback mode (Program playback or Random
playback), press REPEAT twice. The REP indicator lights.
Random playback - To play all tracks in random
order
Press RANDOM. The RND indicator lights and all tracks on the
disc are played in random order. After all tracks are played, the
player enters stop mode.
Adjusting the sound volume (PD-217 only)
Press OUTPUT LEVEL "–" or "+" to adjust the output level.
÷ The output level can be adjusted between 0 dB and –25 dB in
steps of 1 dB.
÷ The ATT display shows the selected level.
÷ The output level at the LINEOUT jacks and PHONES jack will
be adjusted simultaneously.
÷ If the disc is in the player, the setting of the OUTPUT LEVEL
button is not erased even when the power is turned off.
However, if the power is turned off with an audio timer or by
unplugging the power cord, the setting of the OUTPUT LEVEL
button will be erased.