Furrion FMCM15A-BL Manual Del Usuario página 17

5
When the setting is finished:
●
If the clock has been set, the clock will be displayed 2
seconds later after the
●
If the clock has not been set, the oven will return to standby
mode and display blank in the screen.
Setting the Filter Reset Reminder
The filter reset is simply a timed function to remind you to
change the filter. When the function is enabled, the "FILTER"
reminder icon will be displayed every 6 months to remind you
that it is time to change the filter.
Suppose the filter reset function was enabled, and you want to
set the filter reset reminder OFF:
Step Touch Display
1
2
3
4
5
6
Setting the Displaying Language
You can set the microwave displaying language through the
pad to your preferred language.
NOTE: Only "ENGLISH" and "FRENCH" are available.
Suppose the displaying language was set as English and you
want to change it to French:
Step Touch Display
1
2
3
4
5
6
7
When the setting is finished:
●
If the clock has been set, the clock will be displayed 2
Touch the pad once
the preferred option
is displayed.
is touched.
Remark
Touch the pad once
the preferred option is
displayed.
Remark
seconds later after the
●
If the clock has not been set, the oven will return to standby
mode and display blank in the screen.
To return the displaying language to English, repeat the steps 1
to 7.
Setting the Weight Unit
You can set the microwave displaying weight unit through the
pad to your preferred unit.
NOTE: Only "KG" and "LB" are available.
Suppose the displaying weight unit was set as kilogram and
you want to change it to pound:
Step Touch Display
1
2
3
4
5
6
7
8
When the setting is finished:
●
If the clock has been set, the clock will be displayed 2
seconds later after the
●
If the clock has not been set, the oven will return to standby
mode and display blank in the screen.
To return the displaying weight unit to kilogram, repeat the
steps 1 to 8.
Setting the Demo Mode ON/OFF
The demo mode is ideal for learning how to set various
programs and use the microwave without actually generating
any microwave power.
Suppose the demo mode was set at OFF, and you want to set
it ON:
Step Touch Display
1
2
3
4
- 16 -
is touched.
Remark
is touched.
Remark
CCD-0006074 Rev: 09-16-22