Technical Data - Stanley SCS220 Traducción De Las Instrucciones Originales

ENGLISH
The hook and loop fastening system sanding disc can be
u
easily removed by simply pulling it off. It can be reused
as desired.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off (Fig. F)
To switch the tool on, depress the on/off switch (2) at the
u
"I" position.
To switch the tool off, depress the on/off switch (2) at
u
the"O" position.
Operation (Fig.G)
Grasp the sander as shown in figure G and turn it ON
it in long, sweeping strokes along the surface, letting it do
.
the work
Pushing down on the tool while sanding actually slows the
removal rate and produces an inferior quality finish.
Check your work often. Sander is capable of removing
material rapidly especially with coarse paper.
Dust Collection
Warning! Collected sanding dust from sanding surface
coatings (polyurethane, linseed oil, etc.) can self=ignite and
cause fire. To reduce risk, strictly follow sander manual and
coating manufacturer's instructions.
Connecting a vacuum cleaner (Fig. H)
Insert the hose (9) of the vacuum cleaner into the dust
u
extraction outlet (5).
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using
u
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
20
(Original instructions)
.
Move
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Input voltage
Oscillations (no load) min
Orbits (no load) min
Sanding base surface mm
Pad Size mm
Weight
Charger SC125
AR , B2 220V
Input V
B3
120V
AC
Voltage
BR BIVOLT
(127V | 220V)
Output 18V
V
DC
Voltage （20V MAX）
Current A 1.25
Battery
SB201
Voltage
V 18V
DC
(20V MAX)
Capacity Ah
1.5
Type
Li-Ion
Include: (1) Random Orbital Sander, (1) SA Dust Bag, (1) Mesh, 80Grit Sheet
SCS220D1S: 1* ROS Sander + 1* Battery 2 Ah + 1* Charger
2A + SoftBag
SCS220C1S: 1* ROS Sander + 1* Battery 1,5 Ah + 1* Charger
1,25A + SoftBag
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you or visit us at
www.stanleytools-la.com.
V 18V (20V MAX)
dc
-1
-1
2
kg 1.02 (without battery)
SC200 SC400
AR / B2 220V AR / B2
B3 B3
120V
BR 127V BR
18V 18V
（20V MAX） （20V MAX）
2
SB202 SB204
18V 18V
(20V MAX) (20V MAX) (20V MAX)
2.0 4.0
Li-Ion Li-Ion
SCS220
12 000
12 000
12 660
125
220V
120V
127V
4
SB206
18V
6.0
Li-Ion