Aircare 4DTS900 Guía De Configuración página 3

FILL BOTTLES WITH WATER
REMOVE THE WATER BOTTLE
CAP FROM EACH BOTTLE AND
FILL WITH COOL WATER. FILL
BOTTLES AT THE SINK OR USE
THE FILLER HOSE (INCLUDED).
CAPACITY: 2.75 GALLONS
PER BOTTLE
LEVEL
USE A BUBBLE LEVEL
TO VERIFY THE CABI-
NET IS LEVEL.
OPERATION
NIGHTTIME
SETTING
(LIGHTS OUT)
FAN
SPEED
(F1-F9)
LOCATE THE SERIAL NUMBER
LABEL ON THE BACK OF THE
CHASSIS AND WRITE IT ON
THIS MANUAL COVER FOR
QUICK REFERENCE
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
REINSTALL CAPS
ENSURE THE BOTTLE
CAPS ARE SECURED
TIGHTLY ONTO EACH
BOTTLE.
POSITION
HUMIDISTAT SHOULD HAVE
FREE AIR FLOW, AND UNIT
SHOULD BE AT LEAST 2
INCHES AWAY FROM THE
WALL.
REDUCE INCREASE
FAN FAN
SPEED SPEED
AMBIENT
OR SET
HUMIDITY
INSTALL THE BOTTLES
INVERT THE BOTTLES, AND
LOWER THEM INTO THE
CABINET BY THE HANDLES,
CAP-SIDE DOWN
2"
(5 cm)
35
REDUCE
HUMIDITY
SETTING
REFILL
WATER
TANKS
3
.
ASSEMBLE
PLACE THE CHASSIS
ON TOP OF THE BASE.
REMOVE THE TAPE ON
EACH SIDE COVER.
INCREASE TURN
HUMIDITY UNIT
SETTING ON/OFF
CHECK
FILTER
(WICK)
SERIAL NUMBER LABEL