Troubleshooting - Qilive Q.5893 Manual De Instrucciones

7. TROUBLESHOOTING

Problem
There is rust on the metal
parts of the appliance.
Water leaks from the
bottom of the espresso
machine.
Water leaks from the
sides of the filter.
Possible cause
The descaler used was
not suitable for espresso
machines. The descaler
was too strong and
corroded the metal parts.
The drip tray is full.
Malfunction in the
appliance.
There are coffee grounds
around the rim of the
filter.
The filter is overfilled.
The portafilter is not
properly locked into the
brew head.
9
Possible solution
Use a commercially
available descaler
suitable for espresso
machines.
Empty and clean the drip
tray regularly.
Unplug the appliance
and contact your nearest
authorised service centre
to arrange a repair.
Remove loose coffee
grounds around the rim of
the filter before inserting
the portafilter onto the
brew head.
Do not fill coffee grounds
above the rim of the filter.
Fill coffee grounds evenly
and level with the rim of
the filter, and then tamp
the coffee grounds with
the tamper.
Ensure the portafilter is
properly inserted into
the brew head in the
"INSERT" position, and
then turn the handle to
the right until it reaches
the "LOCKED" position.
EN