Nordcap SALAMANDER SEH 004 E Manual De Instrucciones página 31

5.4 • FUNCTION - OPTIONS - UPPER AND LOWER COOKING PLATE
3. Use T3 button to select cooking zone of the upper
plate:
• ONLY CENTRAL ZONE
The white led light of button T3 indica-
ted by the arrow is on
• COMPLETE UPPER PLATE
The white led light of button T3 indi-
cated by three arrows is on.
4. Once you have selected your parameters, push
START/STOP to start required cycle.
When the cooking cycle with time setting is over,
you will see "End" on the display, together with a
signal tone of 60 seconds.
If you select a program of cooking+ holding, a
short signal tone will indicate the program is swi-
tching from cooking into holding function.
5. Use T4 button to heat the lower plate.
Pushing T4 you can select the temperature level
and start the heating of the lower plate.
TEMPERATURE:
A. 90°C
White led light of T4 on the bottom
right is on flashing.
B. 150°C
Lower white led lights of T4 are on
flashing.
C. 190°C
Lower white led lights and the
button on the left top of T4 are on
flashing.
30
Ed. 03-22