JVC KD-DV5000 Manual De Instrucciones página 46

DVD
Items
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D.RANGE COMPRESSION
46
For what and options
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear.
• PCM ONLY
Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital and DTS, or connecting to a
recording device.
• DOLBY DIGITAL/PCM
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital.
• STREAM/PCM
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital and DTS.
When playing back a multi-channel DVD disc, this setting affects the
sounds reproduced through the analog terminals.
• STEREO
Normally select this to enjoy and reproduce conventional 2-
channel stereo sound from the original multi-channel sounds.
• DOLBY SURROUND
Select this when you want to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby Surround to this
receiver.
You can enjoy a powerful sound at low or middle volume levels while
playing a Dolby Digital software.
• AUTO: Select this to apply the effect to multi-channel encoded
software (excluding 1 channel and 2 channel software).
• ON: Select this to always use this function.