Menu 8: Door Adjustments; Menu 9: Accumulator Type Settings; Completing The Installation Procedure - Novoferm N-423 Accu Manual De Instrucciones

4.11.4 Menu 8: Door adjustments
NOTICE
After the setting was changed, the force learning cycle must be re-
peated.
1. Select menu item "8".
ð After approximately 2 seconds, the display flashes and the set value
appears. For optimal movement and to maintain the forces, the
appropriate closing speed must be selected.
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) but-
tons.
3. Press the SAVE button (D).
ð The display shows "9".
Menu value
0
1
2
4.11.5 Menu 9: Accumulator type settings
1. Select menu item "9".
ð After approximately 2 seconds, the display flashes and shows the set
value of the operating mode. The factory setting is "0".
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) but-
tons.
Value
0
1
2
3
3. Press the programming button (PROG button) (D).
ð The display shows "0". End of menu (if necessary, continue with power
learning cycle).
4.12

Completing the installation procedure

Close the cover of the drive head.
Check if the garage door operates properly and safely. See chapter "Mainten-
ance / Checks".
Closing speed
100 %
90 %
80 %
Accumulator type settings
Panasonic LC-CA1215P1
Type 2
Type 3
Type 4
EN - 65