Long Pull; Black 1-1/2" Flat Head Screw; Black 1/2" Machine Head Screw; Black 3/8" Machine Head Screw - Sauder 420645 Manual De Instrucciones

Step 8
Fasten the LONG PULL (12) to the SLIDING DOOR (G). Use two
å
BLACK 3/8" MACHINE HEAD SCREWS (19).
Place the SLIDING DOOR (G) into the groove in the TOP (D).
å
Insert thirteen WOOD DOWELS (8) into the edges of the ENDS (A
å
and B), UPRIGHT (C), and BACKS (F).
Fasten the BOTTOM (E) to the ENDS (A and B), UPRIGHT (C), and
å
BACKS (F). Use ten BLACK 1-1/2" FLAT HEAD SCREWS (15).
NOTE: Start each SCREW a few turns before completely
å
tightening any of them.
NOTE: Be sure the SLIDING DOOR inserts into the groove in
å
the BOTTOM.
NOTE: Be sure the WOOD DOWELS in the ENDS, UPRIGHT,
å
and BACKS insert into the BOTTOM.
15

BLACK 1-1/2" FLAT HEAD SCREW

(10 used for the BOTTOM)
F
A
Page 12
E
F
C
D
The LONG PULL
must be here.
www.sauder.com

BLACK 3/8" MACHINE HEAD SCREW

(2 used for the LONG PULL)
G
12
B
G
Groove
19
Groove
(13 used)
8
420645