Seat Unit
(8) 5-POINT HARNESS - BUCKLE YOUR CHILD
8.1 Place the crotch strap between the child's legs and up towards the waist.
8.2 Insert the waist straps into the harness buckle until they "click" into place. Check that the waist straps are fastened securely.
8.3 Adjust all sliding buckles on the shoulder and waist straps so that the straps sit snugly against the child's body.
8.4 To release the shoulder and waist straps, press in the buttons on the sides of the harness lock.
8.5 Attachment points are provided at the ends of each waist strap for a separate harness complying with BS 6684.
WARNING Always fasten the child in with the harness when the child is sitting in the stroller.
Check that all buckles are correctly fastened and that the harness is securely assembled in the stroller.
Change Position of the 5-Point Harness
8.6 Remove the shoulder pads. Use the zip to open the seat unit fabric.
8.7 Take out the shoulder straps through the back of the seat unit fabric and thread it through the other hole. Repeat
on the other side.
8.8 Close the zip on the seat unit fabric.
8.9 Open the zip under the seat unit
8.10 Take out the crotch strap completely from the seat unit's fabric.
8.11 Thread the crotch strap through the second hole.
8.12 Close the zip. IMPORTANT! The zip should be closed.
WARNING Before you use the pram again always check that the seat unit fabric is secure and that all zips are
securely and properly fastened.
WARNING It is important that the seat unit fabric is always correctly fitted.
WARNING Never use the pram without making sure the seat unit fabric is correctly assembled on the frame first.
(9) FOLD THE SEAT UNIT FOR TRANSPORTATION
9.1 Unlock the plastic buckle locking the fabric downwards.
9.2 Press the fabric down to the frame and fold the left and right side.
WARNING Always make sure you lock the plastic buckle again after the transportation.
NXT 2in1 v1.0
39