Other Features; Sleep Operation - Airwell HDHC-025N-09M25 Manual De Usuario E Instalacion

A guide on using the infrared remote is not
included in this literature package.
the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.

Other Features

Auto-Restart(some units)
•
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Anti-mildew (some units)
•
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
Wireless Control(some units)
•
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional staff.
Louver Angle Memory(some units)
•
When turning on your unit, the louver will
automatically resume its former angle.
Active Clean function(some units)
•
-- The Active Clean Technology washes away
dust, mold, and grease that may cause odors
when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
effect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the evaporator,
thus preventing the growth of mold and keeping
the inside clean.
-- When this function is turned on, the indoor
unit display window appears "CL " , after 20
to 45 minutes, the unit will turn off automatically
and cancel Active Clean function.
Breeze Away (some units)
•
This feature avoids direct air flow blowing on
the body and make you feel indulging in
silky coolness.
Page 10
 
Refrigerant Leakage Detection
•
Not all
The indoor unit will automatically display "EL0C"
when it detects refrigerant leakage.
ECO Intelligent eye
•
The system is controlled intelligently under
Intelligent eye mode. It can detect the people's
activities in the room. In cooling mode, when you
are away for 30 minutes, the unit will automatically
lower the frequency to save energy(for Inverter
models only). And the unit will automatically start
and resume operation if sensing human activity
again.

Sleep Operation

•
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
When in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
The sleep feature will stop after 8 hours and
the system will keep running with final situation.
Set
temperature
NOTE:
For multi-split air condtioners, the following
functions are not available:
Active clean function, Silence feature, Breeze
away function, Refrigerant leakage detection
function and Eco feature.
(some units)
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the first two hours
1hr
1hr
Heat mode( -1 C/2 F) per hour
for the first two hours
Saving energy during sleep
(some units)
Keep
running