Maintenance; Information About The Guarantee - JANE iMatrix Manual Del Usuario

M. MAINTENANCE
Do not expose the cover to sunlight for long periods. When the seat is
not in use, cover it or store it in the boot.
Wash the plastic parts with warm water and soap, carefully drying all
the components afterwards.
The upholstery can be removed for washing. Follow the instructions
below:
Unfasten the safety harness clip and pass it through the slot in the
upholstery.
Take off the rubber bands that go underneath the car seat belt
fasteners.
Remove the ones found on the headrest buttons too.
Take the upholstery off the I MATRIX safety seat.
Undo the Velcro strips found in the seat belt area, and those on the
bottom of the headrest then carefully pull the upholstery.
Wash by hand at a temperature never higher than 30° C.
To refit the cover, follow the same steps in reverse order.
28 EN
N. INFORMATION ABOUT THE GUARANTEE
- This item is guaranteed against manufacturing defects as stipulated
in the legal Directives and/or regulations in force on guarantees for
consumer goods applicable to the European Union and those of the
country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to
process the guarantee through the seller of the item or, failing that,
through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-
compliance with the safety regulations and instructions for use and
maintenance provided, or due to wear and tear caused by normal use
and regular handling of the item.
- The label containing the serial number of your model must not be
torn off under any circumstances as it contains information relevant
to the guarantee.
EN 29