BABYTREND HC01 A Serie Manual De Instrucciones página 7

OPERATION
TO RELEASE SAFETY BELT
13) • Push Button on Center Clasp, the two
Harness Buckles will pop free (Fig. 13).
RECLINE SEAT
14) • Squeeze recline lever on back of the
seat and adjust to the preferred recline or
upright position (Fig. 14).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
11
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ADJUST SEAT HEIGHT
Center Clasp
Fig. 13
Fig. 14
15)
ATTENTION:
Make sure the Height Brackets lock on the
lowest position.
Brackets on the Locking Pins (Fig. 15c).
BRAKES
16)
WARNING:
Do not adjust
seat height with child in seat.
Adjust seat height before placing
your child in the high chair.
WARNING:
The child
should be secured in the high
chair at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
WARNING:
Always check
that the height adjustment bracket
is level and both left and right
sides locked before placing child
in the high chair.
WARNING:
Never rest the
height adjustment bracket on
the locking pins.
• Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 15a) and adjust to the
ideal position (Fig. 15b).
DO NOT adjust with child in the seat.
DO NOT rest Height Adjustment
• To engage brakes, apply downward
pressure to the brake tabs. Check that the
High Chair will not move and that brakes
are properly applied. To release, lift up on
the brake tabs (Fig. 16).
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Release Handle
Fig. 15a
Highest Position
Lowest Position
Locking Pin
Fig. 15b
Fig. 15c
Fig. 16
12