SAFETY INFORMATION
• Do not use the meter if it is wet or damaged. Electric shock can
result.
• Do not apply more than 1000 VDC or 750 VAC between any terminal
and earth ground. Electric shock can result.
• Do not attempt to measure more than 1000 VDC or 750 VAC. Electric
shock can result.
• Do not attempt to measure more than 10 amps. Electric shock can
result.
• Do not open the case while the test leads are connected to the circuit
or while the meter is ON. Electric shock can result.
Failure to observe these warnings can result in severe injury or death.
Do not connect the meter to a source of voltage or current when the
selector switch is in the Ω position or the
the meter can result.
4
All manuals and user guides at all-guides.com
Electric shock hazard.
Contact with live circuits can result in severe
injury or death.
position. Damage to