Safety Information - Greenlee 93-105/00408 Manual De Instrucciones

SAFETY INFORMATION

• Do not connect the meter to a source of voltage or current when the
selector switch is in the
position. Damage to the meter can result.
• Do not change the position of the selector switch when the test
leads are connected to a component or circuit. Damage to the meter
can result.
• Do not expose meter to extremes in temperature or high humidity.
Damage to the meter can result. See Specifications section of this
manual.
• Do not attempt to repair this test instrument. It contains no user-
serviceable parts.
Failure to observe these precautions can result in injury and can
damage the instrument.
All manuals and user guides at all-guides.com
• Electric shock hazard. Contact with live circuits
can result in severe injury or death.
• Do not use the meter if it is wet or damaged.
Electric shock can result.
• Do not apply more than 1000 VDC or 750 VAC
between any terminal and earth ground. Electric
shock can result.
• Do not attempt to measure more than 1000 VDC
or 750 VAC. Electric shock can result.
• Do not attempt to measure more than 10 amps.
Electric shock can result.
• Do not open the case while the test leads are
connected to the circuit or while the meter is
ON. Electric shock or damage to the meter can
result.
Failure to observe these warnings can result in
severe injury or death.
position or the
93-105 / 00408
3