BIEMMEDUE QTPS Manual De Instrucciones página 28

EN
Instruction manual for installation, use and maintenance
3. Some parts of this document are addressed only to
specialized technical personnel (see paragraph "3.c"), in
order to give the necessary information for assembling,
installing e maintaining the machine.
4. In order to prevent injuries, in the manual there are some
symbols (see paragraph "2") used to mark safety precautions.
Warnings that accompany these symbols need always to
be followed carefully.If a dangerous situation shows up or
if it's considered, always think about safety first and make
the necessary actions to deal with the situation.
5. A qualified worker is the one who understood the written
instructions received by the vendor, who followed a specific
education course or who knows the workplace safety rules.
6. To work in absolute safety, it's necessary to know
performances and features of the machine.
7. The current manual contains technical information necessary
for the correct installation of the machine as well as to
reactivate the right operation of it. In case a set of problems
on installation and/or maintenance which are not treated in
this manual is spotted, please contact the manufacturer's
technical support service.
8. The terms, right, left, etc., used in this manual in order to
locate various machine's components are always referred to
the frontal view of the worker looking at the machine (Fig.2).
9. Always wear the appropriate devices for individual protection
(gloves, safety shoes, etc.) as prescribed by qualified
authorities.
10.Disconnect the machine from the power supply before
intervening on it, except where otherwise specified.
11. Always keep the machine's adjacent area clean and be sure
that the floor is not dirty and/or oiled or greased.
EN - 4
Ed. 05/2020