BIEMMEDUE QTPS Manual De Instrucciones página 30

EN
Instruction manual for installation, use and maintenance
5. The connection cable linked to the electricity supply has
to be regularly controlled to verify the possible presence
of breaks and wear.
6. If any damage is spotted is necessary not to use the device
anymore.
NOTE
Before connecting the plug to the power socket, be sure that the
line voltage corresponds to the value reported on the machine's
rating label and in the "Technical characteristics" paragraph (Fig.1).
7. Before inserting the plug in the power socket, make sure
that the power switch is in position "0" (0FF).
8. For your safety, we recommend to power the machine
by means of a differential circuit-breaker (RCD) with an
operating current of no more than 30 mA.
9. Should the wall outlets and the unit plug be incompatible with
each other, have the wall outlet replaced by an appropriate
one by a qualified electrician.
He, in particular, shall also make sure cross section of the
wires corresponds to the absorbed power of the machine.
Generally, adapters, multiple sockets and / or extension
cables should not be used. However, if necessary, only
use single or multiple adapters and extension cables,
which comply with existing safety standards, making sure
however that the current carrying capacity limits, marked on
the single adapter and on the extension cables, as well as
the maximum power limit marked on the multiple adapter,
are not exceeded.
10. The use of any electric machine involves compliance with
certain basic rules. In particular:
- never touch the machine with wet or damp hands;
- never use the machine with bare feet;
- never pull the power cord or the machine to remove the
EN - 6
plug from the wall socket;
Ed. 05/2020