Electrical Connection; Functioning - BIEMMEDUE QTPS Manual De Instrucciones

EN
Instruction manual for installation, use and maintenance
11.

ELECTRICAL CONNECTION

CAUTION
Before making the electrical connection,
make sure that the switch (11) is in the "0"
(OFF) position.
CAUTION
Be sure that the mains voltage corresponds to what is reported on
the machine's rating label and in the "Technical characteristics"
paragraph.
- Insert the plug into the socket.
12.

FUNCTIONING

NOTE
To use the "QTPS", follow the indications of the PPE shown
on the safety sheet of the chemical product used (not
supplied with the machine).
13.
Lift the machine using the specific handle (6).
14.
Press the ON/OFF switch (11) to start the machine. (Fig.8)
15.
Grasp the gun (12) and press the lever (12a) to dispense the sanitizing
product. (Fig.7)
NOTE
Do not point the gun (12) towards yourself, against other people or
animals.
16.
After use, press the ON/OFF switch (11) again to switch off the machine and
then disconnect the plug from the socket.
EN - 16
230V~50Hz
Ed. 05/2020