How to use
• When you use the product for the first time, try it by
pressing it gently against the skin and start shaving gently.
10
PB020029 - ER-GM40
1. Hold the protective cap to pull it out.
2. Turn on the power switch, and start
trimming.
Trimming wet hair
• Do not use the attachments when
trimming wet hair.
• Wet and apply soap beforehand to the
area to be shaved.
3. Slide the power switch to off position
at the end of each use.
• Clean the appliance after each use.
- Failure to do so may cause blade to
lose sharpness.
(See page 15)
_(01EN)_01-19-21.indd 10
2021/1/19 9:42:59