Maintenance
• Be sure to clean the appliance with the battery cover
attached.
• Make sure that the main body is turned off.
Wet cleaning
1. Remove the blade and
2. Shake up and down several
3. Wipe off the water with a towel
Dry cleaning
Brush off any remaining hair trimmings.
PB020029 - ER-GM40
attachments (See pages 11
and 17) and rinse under
running water.
• Cover the drainage outlet of
washbasin to prevent the inner
blade from flowing away.
• If you are concerned about the
dirt, wash it off with hand soap
or the like.
times to remove the water.
• Be careful not to hit the main
body on the sink or any other
object while draining the water.
Failure to do so may cause
malfunction.
and let it dry naturally.
• It will dry faster with the blade removed.
_(01EN)_01-19-21.indd 15
15
2021/1/19 9:43:06