Declaration Of Conformity - STEINEL XLED Manual Del Usuario

Troubleshooting
Malfunction
Sensor-switched LED floodlight
without power
Sensor-switched LED floodlight will
not switch ON
Sensor-switched LED floodlight
will not switch OFF
Sensor-switched LED floodlight
keeps switching ON and OFF
Sensor-switched LED floodlight
switches ON when it should not

Declaration of Conformity

This product complies with
- Low-Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- RoHS Directive 2011/65/EU
- WEEE Directive 2012/19/EU
Functional Warranty
This STEINEL product has been manufactured with
the utmost care, tested for proper operation and
safety and then subjected to random sample inspec-
tion. Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is 36
months and starts on the date of sale to the consumer.
We will remedy defects caused by material flaws or
manufacturing faults. The warranty will be met by
repair or replacement of defective parts at our own
discretion. The warranty shall not cover damage to
wear parts, damage or defects caused by improper
treatment or maintenance.
All manuals and user guides at all-guides.com
Cause
n F use faulty, not switched ON,
break in wiring
n S hort circuit
n I n daylight mode,
twilight setting
set to night mode
n Mains switch OFF
n Fuse faulty
n P ermanent movement in the
detection zone
n A nimals moving in the detection
zone
n W ind is moving trees and bushes
in the detection zone
n C ars in the street are being
detected
n S udden temperature changes
due to weather (wind, rain, snow)
or air expelled from fans, open
windows
n S ensor-switched LED floodlight
is moving (swaying) due to gusts
of wind or heavy rain
Remedy
n F it new fuse; switch ON mains
n C heck connections
n Adjust setting
n Switch ON
n F it new fuse, check
n Readjust
n C heck zone and readjust if
n F it shrouds to target sensor;
n C hange detection zone
n C hange detection zone
n C hange detection zone, change
n M ount sensor-switched LED
Further consequential damage to other objects shall
be excluded. Claims under the warranty will only be
accepted if the unit is sent fully assembled and well-
packed with a brief description of the fault, a receipt
or invoice (date of purchase and dealer's stamp) to
the appropriate Service Centre.
Service:
Our Customer Service Department will
repair faults not covered by warranty or
after the warranty period. Please send
the product well-packed to your near-
est service station.
- 11 -
switch; check wiring with
voltage tester
connection if necessary
necessary or apply shroud
adjust detection zone, or fit
shrounds
site of installation
floodlight on a firm surface