Assembly - Husqvarna LB 548i Manual De Usuario

• Put on heavy duty gloves
when you use the cutting
equipment. The blade is very
sharp and cuts can easily
occur.
• Keep the cutting edges sharp
and clean for the best and
safest performance.
• Let your service agent
regularly examine the
product and make necessary
adjustments and repairs.
• Replace damaged, worn or
broken parts.
Introduction
WARNING:
safety chapter before you assemble the
product.
To install and remove the multi battery
(accessory)
1. Remove the 4 rubber covers and the 4 screws from
the motor cover.
2. Put the adapter plate onto the motor cover.
14

Assembly

Read and understand the
• Obey the instructions for how
to change accessories. Only
use accessories from the
manufacturer.
• When not in operation, keep
the product, battery and
battery charger apart in a dry,
indoor and locked area. Make
sure that children and persons
that are not approved cannot
get access to the product,
battery or battery charger.
3. Attach the adapter plate with the 4 supplied screws
to a torque of 5-6 Nm.
4. Open the battery hatch.
1630 - 004 -