STEP 2
1. Attach the strap (L) on the left pedal (13) and fasten the other side to the
appropriate hole of left pedal (13). Repeat to attach strap (R) on right
pedal (14)
2. Attach the Left Pedal (13) counterclockwise to the left crank (10).
3. Attach the Right Pedal (14) clockwise to the right crank (11).
STEP 3
1. Connect the lower sensor wire (12) with the sensor wire from the back of
console (4).
2. Insert Console (4) to the bracket of front stabilizer (2).
When you prefer to put the console on the desk or somewhere else, please refer
to the following STEP 4
EN
31