Features; Stand Assembly & Adjustment - Vornado 133 Guia Del Propietario

FEATURES

Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to
set your summertime thermostat as low or your wintertime thermostat as high.
DIRECTABLE
CONTROLS
AIRFLOW
Direct the
HIGH
airflow where
OFF
LOW
you want it.
133
CONTROL
KNOB
OFF
HIGH
533, 633, 753
CONTROL
MED
KNOB
LOW
HIGH
MED
OFF
683
LOW
CONTROL
KNOB
8
English
STAND ASSEMBLY & ADJUSTMENT
(MODEL 683)
STAND ASSEMBLY
1. Insert power cord (A) into
the top of Pole and pull
through the bottom.
FINGER FRIENDLY DESIGN
2. Push the Circulator Head
Resists curious fingers.
into the Pole. Push until
the Lock Release Button (B)
REMOVABLE GRILLE
snaps through the Hole (C).
For easy cleaning.
3. Remove the Fastening
Nut (D) secured on the
AIR INLETS
underside of the base.
Signature inlets and powerful
Rotate Fastening Nut
motor to move more air. counter-clockwise to
remove.
4. Assemble Legs onto the
base of Pole by pushing
MULTIPLE SPEEDS
each Leg onto the grooves
(E). Replace Fastening Nut
Speed setting for every
comfort level. (D) by rotating clockwise to
secure all the Legs in place.
SILICONE FEET
Non-marking feet added
for stability.
No tools required.
B
C
A
E
D
HEIGHT ADJUSTMENT
(31 - 38 INCHES)
1. Support the Circulator Head
(A) with one hand. Use your
other hand to loosen the
Adjustment Collar (B) by gently
rotating it counter-clockwise.
A
2. Slowly raise or lower the
Pole to the desired height
and secure into position by
rotating the Adjustment Collar
clockwise until tight.
Note: Before adjusting the
height or rotating the head,
check that the power cord is
not tangled and able to move
freely.
B
After adjusting height, ensure
that the Adjustment Collar is
fully tightened and engaged to
ensure Circulator Head does
not rotate and bind power
cord.
9
English