Cleaning - Vornado 133 Guia Del Propietario

CLEANING

GRILLE REMOVAL (MODEL 133)
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grille.
1. Remove the 4 screws located
on the back of the inlet grille,
at roughly 2, 5, 7 and 10 o'clock
positions, to release the Front
Grille. Screw
2. Dust or wash Front Grille with a
mild dishwashing soap. Do not
place grille in the dishwasher.
The excessive heat can distort
the plastic.
3. To reattach - position the Front
Grille so the Vornado logo in
the center of the Front Grille is
straight. Replace all the screws.
Screw
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grille and Air Inlets.
10 English
CLEANING
GRILLE REMOVAL (MODELS 533, 633, 683, 753)
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grille.
1. Remove the 3 screws located in between
the ribs of the inlet grille at roughly 10, 2,
and 6 o'clock positions. Screw locations are
also indicated with an arrow* (
circulator. Do Not remove the 2 screws
Screw
on the pivot arms. Release the Front Grille
Clips located at the 2, 5, 7 and 10 o'clock
positions.
2. Dust or wash Front Grille with a mild dish-
Note: The motor is
washing soap. Do not place grille in the
permanently lubricated
dishwasher. The excessive heat can distort
and requires no oiling.
the plastic.
3. To reattach - align the Front Grille Clips
with the holes and firmly snap each clip
back into place. Replace all the screws.
Screw
*Model 753 does not have arrow indicators.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grille and Air Inlets.
Screwdriver required.
Front Grille Clip
’
) on the
Screw
Front Grille Clip
Front Grille Clip
Screw
Note: The motor
is permanently
lubricated and
requires no oiling.
Front Grille Clip
Screw
11
English