Bosch GBH18V-24C Instrucciones De Funcionamiento Y Seguridad página 13

Auxiliary Handle
The tool must be supported with the auxiliary
handle (13), which can be swiveled 360˚.
To reposition and/or swivel the handle, loosen
the hand grip, move the handle to the desired
position along the barrel and securely retighten
the hand grip (Fig. 6).
Depth Gauge
Your drilling depth can be pre-set and/or repeat-
ed by using the depth gauge.
Setting depth: After the auxiliary handle is in-
stalled, make sure the accessory has been fully
inserted into the tool holder (2) before setting
the depth gauge (14) (Fig. 7).
To adjust depth, push the depth gauge release
button (5), slide the depth gauge (14) to desired
depth and release pressure on button to lock
the depth gauge in place.
1605A000XG GBH18V-24C 202208.indd 13
page heading Assembly
Fig. 6
Fig. 7
-13-
(13)
(2)
(14)
X
(5)
9/15/22 10:41 AM