Espresso And Coffee; Two Espressi And Two Coffees; Permanently Setting The Amount Of Water For The Cup Size - Jura ENA 4 Instrucciones De Uso

Espresso and coffee

Two espressi and two
coffees
Permanently setting the
amount of water for the cup
size
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. You can purchase a JURA Cup Warmer
from your specialized dealer.
Example: Coffee
Place a cup under the coffee spout.
T
Press the ] button.
T
The preset amount of water for coffee flows into the cup.
Example: Two espressi
Place a cup under the coffee spout.
T
Press the [ button 2x.
T
E Two brewing operations take place one after the other.
Change the cup before the second brewing operation.
E To prepare two coffees, press the ] button 2x.
The preset amount of water for espresso flows into the cup.
It is easy to make permanent settings for the amount of water for all
specialty coffees according to the cup size. Adjust the amount once
as shown in the following example. Every time you prepare a drink
in the future, this amount of water will be dispensed.
The process for permanently adapting the amount of water to the
cup size is the same for all specialty coffees.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Place a cup under the coffee spout.
T
Press the ] button for about 2 seconds.
T
The coffee flows into the cup.
Press any button as soon as there is sufficient coffee in the cup.
T
Preparation stops. The set amount of water for one coffee is
permanently stored.
E You can alter this setting at any time by repeating the above
procedure.
4 Preparation
en
fr
es
pt
13