If you place the run-down battery in
the charger cradle straight after use, it
will only start charging once the bat-
tery has cooled down.
The cooling process can take up to
60 minutes. The battery charging state
indicator on the charger cradle will not
respond during this time.
Use
Switching on and off (Fig. 31)
If you have charged the battery in the
wall bracket, take the vacuum cleaner
out of the wall bracket.
If you have charged the battery di-
rectly, unplug the charging plug from
the charging socket on the bottom of
the battery.
For the best possible cleaning results,
always activate the ComfortClean
function before switching on the vac-
uum cleaner (see "Maintenance" –
"Activating the ComfortClean func-
tion").
Press the On/Off switch on the Com-
fort handle .
Regulating the suction power
(Fig. 31)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to maneu-
ver the Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
Min.
Lowest power level for light
soiling
Eco
Medium power level for nor-
mal soiling
Max.
Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power consumption is
automatically set to the optimum level
based on the type of flooring and roller
brush used – this can lead to a change
in the operating noise.
Carpet care function
When the vacuum cleaner is not mov-
ing, the Electrobrush's power is auto-
matically reduced after a few seconds
to protect the floor.
Illuminating the work area
(depending on model)
The Electrobrush on your vacuum
cleaner is equipped with BrilliantLight to
illuminate the work area.
Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is fit-
ted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily inter-
rupt operation while the appliance is
switched on.
en-US
179