Descargar Imprimir esta página

Miele SO - 1422 Serie Instrucciones De Funcionamiento página 64

Publicidad

Idiomas disponibles

Idiomas disponibles

en-CA
 The fine dust filter is located in the lid
of the dust container. Twist it
counterclockwise by three 180° turns.
Use the recesses to help you.
You will hear an operating noise, which
is a normal part of how the
ComfortClean function works.
Emptying the dust
container (Figs. 34–38)
Empty the dust container at the latest
when the dust has reached the MAX
marking on the dust container.
 Turn the lid of the dust container in
the direction of the arrow as far as
the first stop. Use the grey gripping
surfaces to help you do this (Fig. 34).
 Lift the dust container upward to
remove it (Fig. 35).
Provided that no prohibited
substances are present, the contents
of the dust container can be disposed
of with normal household waste.
 Hold the dust container close to the
trash can so that as little dust billows
out as possible.
 Turn the lid of the dust container in
the direction of the arrow as far as
the next stop. Use the grey gripping
surfaces to help you do this (Fig. 36).
The dust container flap will open and
the dust will fall out (Fig. 37).
If chunks of dust, hair, or coarse
debris do not fall out, remove the pre-
filter by pulling it upward (see
"Cleaning the pre-filter and fine dust
filter" below).
64
 Turn the lid of the dust container back
to its original position.
 Close the dust container flap, making
sure it clicks into place.
 Slide the dust container handle along
the guide line and down onto the
PowerUnit connector from above until
the dust container audibly clicks into
place (Fig. 38).
Cleaning the pre-filter and fine dust
filter (Figs. 39–42)
Clean both filters thoroughly at least
once every 3 months.
When cleaning them, it is essential to
follow the steps in the order
described.
 Remove the dust container.
 Empty the dust container over a bin.
 Turn the lid of the dust container
beyond the stop until the arrow tips
are aligned at the top a (Fig. 39).
 Remove the pre-filter by pulling it
upward b (Fig. 39).
 Twist the fine dust filter anti-
clockwise by ten 180° turns. Use the
recesses to help you (Fig. 33).
You will hear an operating noise, which
is a normal part of how the
ComfortClean function works.
 Twist the fine dust filter clockwise.
Use the recesses to help you (Fig.
40).
 Remove the fine dust filter (Fig. 40).

Publicidad

loading

Este manual también es adecuado para:

Triflex hx2Triflex hx2 runnerTriflex hx2 cat & dogTriflex hx2 pro