Fueling - Stihl HT 56 C Manual De Instrucciones

English

Fueling

Preparations
Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
Position the machine so that the
N
filler cap is facing up.
20
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-
up in the tank to release slowly
Opening
Raise the grip into an upright
N
position.
Turn the cap counterclockwise
N
(approx. 1/4 turn).
Remove fuel filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing
With grip in an upright position:
Insert the cap – positioning marks
N
on the cap and the fuel tank opening
must line up.
The cap should drop fully into the
N
opening in this position.
While pressing the cap down, twist it
N
firmly clockwise as far as it will go
(approx. 1/4 turn).
HT 56 C