Descargar Imprimir esta página

Koro BEREITER_003 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
After receiving the product, please check if all components are complete and have
not been damaged. In case of incomplete or damaged delivery, please contact the
manufacturer.
If this device is damaged, it must be repaired or replaced by the manufacturer's central
customer service department or a similarly qualified person. Improper repairs may result
in significant hazards to the user.
2.3 TECHNICAL DATA
Article name:
BEREITER_003
Power supply:
220  -   2 40V, 50/60Hz
Power consumption:
500 W
Dimensions (H × W × D):
20.6 × 15.0 × 10.9 cm
Capacity:
when making foam: max. 150 ml,
when heating milk: max. 300 ml
3 . SA FETY INST RUCT IONS
– Only connect the device to an easily accessible socket so that you can quickly
disconnect it in the event of a malfunction.
– Only connect the device if the electrical supply voltage of the socket corresponds to
the specification on the type plate.
– Do not operate the device if it has visible damage or if the power cord or power plug
is defective.
– If the power cord of the device is damaged, it must be replaced by the manufacturer
or its customer service or a similarly qualified person.
– Do not open the device casing, leave the repairs to specialists. Contact a specialist
workshop for this purpose. Liability and warranty claims are excluded in the event
of repairs carried out independently, improper connection or incorrect operation.
– Only parts that correspond to the original device may be used for repairs.
This device contains electrical and mechanical parts that are essential for
protection against sources of danger.
– Never store the device in such a way that it can fall into the sink or water.
– Never reach for an electrical appliance if it has fallen into water. In such a case,
disconnect the power plug immediately.
– Do not immerse the device itself or the power cord or plug in water or other liquids.
Risk of electric shock!
– Never touch the power plug with wet hands.
– Always disconnect the power plug before cleaning the device.
– Do not use a steam cleaner for cleaning.
– Only use the device in dry indoor areas. Never operate it in damp rooms or in the rain.
– When operating the milk frother, high temperatures arise that can cause burns, e.g.
hot steam, lid as well as hot housing. Only touch the hot milk frother by the handle (6).
22
– Do not place the device near flammable objects, such as curtains.
– Do not let the cord hang over the edge of a table or countertop and don't let it
touch hot surfaces such as stove tops, ovens, etc.
– Keep the unit, power plug and power cord away from open flames and hot surfaces.
– Do not bring the power cord into contact with hot objects.
– Do not cover the device, e.g. with a cloth or similar.
– Do not cover the device, e.g. with a cloth or similar.
– Do not open the lid during operation. Danger of scalding!
– Let the appliance cool down completely before cleaning and/or storing it.
Danger of burns!
– Make sure that you do not fill the liquid container with too much or too little milk.
The amount filled must never be less than the MIN mark inside the liquid container or
more than the MAX mark for the respective operating mode. If overfilled, hot milk or
foam may escape.
– Do not leave milk in the machine to avoid health hazards.
– Never expose the device to high temperatures (heating, etc.) or weather conditions
(rain, etc.).
– Only use the device when it is placed on a flat, stable and insensitive surface.
– Never immerse the device, device plug and power cord in water for cleaning, never
place it in a dishwasher, and do not use a steam cleaner for cleaning. Otherwise, the
device may get damaged.
– Do not use any solvent-based, corrosive or abrasive cleaning agents (e.g. oven or grill
spray) or cleaning utensils (e.g. pot sponges or similar). These can scratch the surface.
– Dry all parts thoroughly after cleaning.
– The appliance must only be operated with the base station supplied.
To avoid hazards, only fill the milk when the machine is not on the base.
– Never use the appliance without milk or without the lid correctly in place.
– Do not use the appliance if the whisk is bent or damaged.
– Do not reheat cooled milk. Always pour away old milk.
23

Publicidad

loading

Productos relacionados para Koro BEREITER_003