Cleaning And Maintenance - Waeco CoolMatic CB-36 Instrucciones De Uso

_CB_RHD_Kühlboxen.book Seite 28 Montag, 20. Dezember 2004 11:24 11

Cleaning and maintenance

Caution!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooling device, proceed as follows:
➤ Take out the contents of the cooling device.
➤ Place them in another cooling device to keep them cool, if necessary.
➤ Set the knob to "0".
➤ Leave the cover open.
➤ Wipe off the defrosted water.
Switching off and storing the cooling device
If you do not intend to use the cooling device for a long time, proceed as follows:
➤ Turn the knob to "0".
➤ Disconnect the power cable from the battery or pull the DC cable plug out
of the rectifier.
➤ Clean the cooling device (see the "Cleaning and maintenance" chapter on
page 28).
➤ Leave the lid or door open for to avoid unpleasant odours building up.
8 Cleaning and maintenance
Caution!
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooling device.
Caution!
Never use brushes, scouring pads or hard or pointed tools to
remove ice or to loosen objects which have frozen in place.
➤ Clean the cooling device regularly as soon as it becomes dirty with a
damp cloth.
➤ Make sure that no water drips into the sealing. This can damage the
electronics.
➤ Wipe the cooling device dry with a cloth after cleaning.
28
CB-36, CB-40, RHD-50