Installing And Connecting The Cooling Device - Waeco CoolMatic CB-36 Instrucciones De Uso

_CB_RHD_Kühlboxen.book Seite 23 Montag, 20. Dezember 2004 11:24 11
CB-36, CB-40, RHD-50
When used on boats the cooling device can be subjected to a constant
inclination of 30°.
COOLMATIC CB-36 and CB-40 devices are equipped with a removable
cooling unit that can be mounted separately.
6 Installing and connecting the cooling
device
6.1 Installing the cooling device
The device is designed for ambient temperatures between –10 °C and
+55 °C. In continuous operation, the air humidity may not exceed 90 %.
Install the cooling device in a dry, sheltered place (installation dimensions:
1 to 3, page 3). Avoid installing the devices next to heat sources such as
heaters, gas ovens, hot water pipes, etc.
The cooling device must be installed so that heated air from the cooling unit
can dissipate easily. Therefore make sure there is adequate ventilation.
On the COOLMATIC CB-36 and CB-40 devices, the cooling unit is
removable and can be mounted at a distance of up to 1.5 m away from the
cooler if space is limited.
6.2 Adapting the decor (only CB-36, CB-40)
The lids of the devices can be adapted to match the decor of the surroundings.

Installing and connecting the cooling device

23