Makita CL183D Manual De Instrucciones página 8

Corner nozzle +Extension wand
(Straight pipe)
1
015515
In tight quarters where the cleaner itself
cannot squeeze in, or in high places hard to
reach, use this arrangement.
Cleaning without nozzle
015516
You can pick up powder and dust without
nozzle.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched
•
off before
inspection or maintenance.
Cleaning
015517
From time to time wipe off the outside
(cleaner body) of the cleaner using a cloth
dampened in soapy water.
1. Corner nozzle
2. Extension wand
3. Cleaner body
3
2
attempting to
Clean out also the suction opening, dust
bag/dust pack mounting area and the dust
stopper.
CAUTION:
Never use gasoline, benzine, thinner,
•
alcohol
deformation or cracks may result.
010009
Wash the filter in soapy water when it is
clogged with dust and the cleaner power
becomes small. Dry it out thoroughly before
use. An insufficiently dried filter may cause
poor suction and shorten the service life of
the motor.
Do not blow dust sticking on the cleaner by
air duster. It brings dust into the housing
and causes failure.
perform
8
or the like. Discoloration,