Daily Maintenance - Jocel JTV013231 Manual De Instrucciones

HIGH TEMPERATURE PROTECT DEVICE
In order to avoid damage and danger because of high temperature, it is equipped with hot
temperature protect device. When the heating setting is too hot and it can cut off automatically.
If it happened:
• Turn function adjust knob to "0"
• Pull out the plug;
• Make it cool 5-10mn;
• Turn it on again.

DAILY MAINTENANCE

1. Turn "function adjust knob" to "0" switch and turn off the power.
2. Pull out the plug.
3. Make it cool down.
4. Rub it with clean water and medium detergent; do not splash the mater into it.
5. Do not rub with gasoline, acid and alkali, in order to avoid fade and damage appearance.
6. When it is stored, it should be cooled and put in the box and in a dry place.
FAIRLURE CONFIRMATION
The fan doesn't work even after the selection of warm or hot wind function.
1. Inspect the plug is not excellent or so.
2. Constant temperature adjust knob is not adjusted to the max? (clockwise to the bottom)
3. Function adjust knob is not turned or so.
-13-