Storage; Disposal; Information On Decontamination - Sartorius Slice 50 Instrucciones De Instalación

Storage

16 Installation Instructions Sartocon
7 Storage
Requirements
The filter has been removed and a clean-in-place has been performed (see
chapter 6, page 14).
Procedure
Replace the Luer caps on the CIP block.
t
Store the adapter, holder and CIP block according to the ambient
t
conditions (see chapter "9.2 Ambient Conditions at the Installation Site",
page 18).
8

Disposal

8.1

Information on Decontamination

The device does not contain any hazardous materials that would necessitate
special disposal measures.
The cultures and fluids (e.g. acids, bases) used during the processes are
potentially hazardous materials that could cause biological or chemical
hazards.
If the device has come into contact with hazardous substances: Measures
must be carried out to properly decontaminate and declare such devices.
The operator is responsible for adhering to local legislation on the proper
declaration of transportation and disposal and the proper disposal of the
device.
WARNING
Risk of injury due to contaminated equipment!
Devices contaminated with hazardous materials (NBC contamination) will
not be accepted by Sartorius for repair or disposal.
Slice 50 Adapter
®