Device Overview - Sartorius Slice 50 Instrucciones De Instalación

Device Overview

8 Installation Instructions Sartocon
3 Device Overview
The device is an optional accessory that allows the use of a Sartocon
Slice 50 filter instead of the standard Ambr
11
10
9
8
7
6
Fig. 1: Adapter with filter
No . Designation
1 Retentate tubing
2 Permeate tubing
3 Compression fittings
4 Luer taper
5 Luer lock ring
6 Luer fittings
7 Filter
Slice 50 Adapter
®
CF filter.
®
1
2
3 4 5
Description
Connects the retentate port on adapter
to the retentate port on the filter.
Connects the permeate port on adapter
to the permeate port on the filter.
One at either end of each length of tube,
grips around the tubing and screws into
the corresponding port on either the
adapter or the Luer fitting.
Fits into the inside of the female Luer
fitting.
Screws around the outside of the female
Luer fitting.
Connects the tubing to the filter.
Consists of 2 parts attached together:
— Luer lock ring
— Luer taper
Not included in the equipment
supplied.
®